THE ULTIMATE GRAPHITE GREY SPRAY
Dekton Spray Paint: Ultimate rust protection, indoors and out. Works wonders on metal, wood, fiberglass, plastics, and more. Speedy drying for swift projects. Elevate your surfaces with Dekton.
HOW TO USE
PREPERATION
For best results, apply to a clean, degreased, dry surface. Remove any residual rust and scale with a wire brush. Prime as necessary before applying the spray paint. Patch test on an inconspicuous area or test material (card/paper) to ensure suitability and allow to dry. When painting over previously painted surfaces, check for compatibility on a small area first. Always check compatibility with substrate before use.
APPLICATION
Invert the can and shake vigorously for 2
minutes after the agitator ball starts to rattle.
Shake frequently during use. Hold upright and
spray from a distance of approximately
15-30cm. Apply in light even layers. For best
results, apply 2 light films at 40-60 minute
intervals rather than 1 heavy film. Additional
layers can be applied at 40-60 minute
intervals. Clear nozzle after use – invert the can
and spray for 3 seconds or until only
propellants is expelled.
DRYING TIME
Soft dry in 15 minutes at 20C. Hard dry in 60 minutes at 20C. Fully cured in approximately 24 hours at 20C. Over-spray can be cleaned with white spirits.
